Starrett
Steel Rule Depth Gage, Metric, 0-150mm Range
Item #:
10900-237M
Product Info
- The gage consists of a nicely finished, hardened steel head and an accurate, machine divided, tempered steel rule
- These rules are either our 610N (6 inch) or our 635N (150mm) models
- Gage can be smoothly adjusted to the required measurement and then locked into position by a knurled nut
- Base is cut out on one side, adjacent to the rule, permitting easier readings and more accurate measurement
- 6” hook rule (236HC, ) also available, permitting readings from the edge of a workpiece to the edges of slots and shoulders. Graduated in 32nds, 64ths
These very handy depth gages can be used to quickly obtain measurements in 64th of an inch or 1/2mm by simply adjusting the rule to the required depth. 0-150mm Range, mm/1/2mm.
⚠ WARNING: Cancer – www.P65Warnings.ca.gov
Item Specifications
-
mm, 1/2
-
0 - 150
-
Mechanical
-
0.30 lbs per PC