Starrett
Inch Reading Dial Indicator Internal Chamfer Gage, 0-1/2" Range, 90-127 Angle
Item #:
10900-684-2Z
Product Info
These gages directly measure the diameter of chamfered holes. No setting master is necessary. When the three-blade plunger is pressed against a fl at surface, the gage should read the set number stamped on the back of the indicator. In case of wear, the gage may be adjusted to read the proper number. 0-1/2” Range In case of wear, the gage may be adjusted to read the proper number.
⚠ WARNING: Cancer – www.P65Warnings.ca.gov
Item Specifications
-
90-127 Degrees
-
White
-
For 90 -127 Degree Angles
-
.001
-
0 - 1/2
-
Internal
-
Mechanical
-
1.65 lbs per PC