Starrett
Thickness Gage Holder Only – Double End, Clamps Stock at Both Ends, for thickness from .001-.025” (0.03-0.5mm)
Item #:
10900-806D
Product Info
- Stock up to 6” (150mm) long is easily inserted in the holder and firmly gripped in the desired position by a cam lock
- This permits all of the stock to be used, because as it wears from use, the defective end can be snipped off and new stock pulled out until used up
- Dull nickel finish
- Size approximately 3/32” thick x 9/16” wide x 5-1/4” long (2.4 × 14 × 130mm)
- Clamps have contrasting finish to eliminate the possible confusion on which end holds the thicker or thinner stock
Starrett 806 thickness gage holders provide a handy, convenient means of rigidly holding single leaves or strips of thickness gage stock of any thickness from .001-.025” (0.03-0.5mm). Stock up to 6” (150mm) long is easily inserted in the holder and firmly gripped in the desired position by a cam lock. This permits all of the stock to be used, because as it wears from use, the defective end can be snipped off and new stock pulled out until entirely used up. Thickness Gage Holder – Clamps Stock at Both Ends.
⚠ WARNING: Cancer – www.P65Warnings.ca.gov
Item Specifications
-
Mechanical
-
0.05 lbs per PC