Starrett
Analog Display Digital Indicator, AGD Group 1, SPC Output, 10mm/.4” Range, 0.02mm/0.01mm/0.002mm/0.001mm/.001”/.0005”/.0001”/.00005” Res.
Item #:
10900-F2715AD
Product Info
- Rugged, sealed enclosures
- Our most versatile line of electronic indicators
- Available in two styles
- Remote display and accompanying probe series
- High Accuracy, capacitive scale design with an unsurpassed accuracy of two resolutions when measuring from a known standard
- American designed and manufactured
- All available resolutions can be utilized in the same indicator, provided they are coarser than the resolution of the purchased model
- 4 resolutions and 2 measuring ranges available
- Starrett can customize electronic indicators to meet your needs
- Units can be designed with features such as: Special measuring ratios like 2:1 and 4:33
- Rotating bezel
- Output data can be used by a variety of peripherals for analysis, data collection and hard copy documentation
- Output jack allows data transmission
- Instant inch/mm conversion
- Zero the tool at any position of the spindle
- Hold button to freeze display: Displays and holds the reading after the measurement has been taken
- Preset mode to install any reading at any point in the display. Reading is retained even if the indicator is turned off
- Plus or minus travel direction
- Auto Off: After 10 minutes of nonuse. When Auto Off is engaged, an hourglass figure appears at the left side of the display
- T.I.R.: Displays the difference between the highest and lowest values reached
The Starrett 2700 Electronic Indicator will make absolute, incremental and/or comparative measurements and implement all the features of 2700 series Indicators. System is suitable for any stand-alone gaging application. .400” (10mm) Range
⚠ WARNING: Cancer – www.P65Warnings.ca.gov
Item Specifications
-
± .0001
-
2700
-
.4
-
10
-
.001/.0005/.0001/.00005
-
0.02/0.01/0.002/0.001
-
Yes
-
3/8
-
Electronic
-
Indicator
-
0.95 lbs per PC