T-Max P DDJNL 3225P 15 25 MM Shank 170 MM OAL Toolholder

Item Specifications

• ANSI Code
  DDJNL 3225P 15
• Body Material
  Steel
• Clamping Type Code
  Clamp
• Coolant Entry Style Code
  Without Coolant
• Coolant Exit Style Code
  No Coolant Exit
• Coolant Through
  No
• Coolant
  No
• Direction of Hand
  Left
• Inclination Angle
  -7 Degrees
• Insert Compatibility
  DNMG 150608
• Insert Style
  DDJNR/L
• Machine Side Body Angle
  0 Degrees
• Material ID
  5731074
• Max. Overhang (Inch)
  1.551
• Max. Overhang (mm)
  39.4
• Max. Ramping Angle
  27 Degrees
• Orthogonal Rake Angle
  -6 Degrees
• Overall Height (Inch)
  1.26
• Overall Height (mm)
  32
• Overall Length (Inch)
  6.693
• Overall Length (mm)
  170
• Overall Width (Inch)
  1.26
• Overall Width (mm)
  32
• Series
  T-Max P
• Shank Height (Inch)
  1.26
• Shank Height (mm)
  32
• Shank Width (Inch)
  0.984
• Shank Width (mm)
  25
• Tool Cutting Edge Angle
  93 Degrees
• Tool Lead Angle
  -3 Degrees
• Torque (Inch)
  2.876 ft lbf
• Torque (mm)
  3.9 Nm
• Workpiece Side Body Angle
  0 Degrees
• Item Weight
  2.21 lbs per PC