T-Max P DDJNR 2525M 11 25 MM Shank 150 MM OAL Toolholder

Item Specifications

• ANSI Code
  DDJNR 2525M 11
• Body Material
  Steel
• Clamping Type Code
  Clamp
• Coolant Entry Style Code
  Without Coolant
• Coolant Exit Style Code
  No Coolant Exit
• Coolant Through
  No
• Coolant
  No
• Direction of Hand
  Right
• Inclination Angle
  -7 Degrees
• Insert Compatibility
  DNMG 110408
• Insert Style
  DDJNR/L
• Machine Side Body Angle
  0 Degrees
• Material ID
  5731099
• Max. Overhang (Inch)
  1.189
• Max. Overhang (mm)
  30.2
• Max. Ramping Angle
  27 Degrees
• Orthogonal Rake Angle
  -6 Degrees
• Overall Height (Inch)
  0.984
• Overall Height (mm)
  25
• Overall Length (Inch)
  5.906
• Overall Length (mm)
  150
• Overall Width (Inch)
  1.26
• Overall Width (mm)
  32
• Series
  T-Max P
• Shank Height (Inch)
  0.984
• Shank Height (mm)
  25
• Shank Width (Inch)
  0.984
• Shank Width (mm)
  25
• Tool Cutting Edge Angle
  93 Degrees
• Tool Lead Angle
  -3 Degrees
• Torque (Inch)
  1.254 ft lbf
• Torque (mm)
  1.7 Nm
• Workpiece Side Body Angle
  0 Degrees
• Item Weight
  1.52 lbs per PC