CoroMill 200 Series RA200-016MN25-09M Steel Face Mill

Item Specifications

• ANSI Code
  RA200-016MN25-09M
• Arbor Hole Diameter (Inch)
  1
• Arbor Hole Diameter (mm)
  25.4
• Body Diameter (Inch)
  1
• Body Diameter (mm)
  25.4
• Body Length (Inch)
  3
• Body Length (mm)
  76.2
• Clamping Type
  Screw/Clamp
• Coolant Entry Style Code
  Without Coolant
• Coolant Through
  No
• Cutting Diameter (Inch)
  0.625
• Cutting Diameter (mm)
  15.875
• Cutting Pitch Differential
  No
• Damping Property
  No
• Direction of Hand
  Right
• Material ID
  5737641
• Material
  Steel
• Max. Cutting Diameter (Inch)
  1
• Max. Cutting Diameter (mm)
  25.4
• Max. Depth of Cut (Inch)
  0.281
• Max. Depth of Cut (mm)
  7.144
• Max. Plunge Depth (Inch)
  0.106
• Max. Plunge Depth (mm)
  2.7
• Max. Ramping Angle
  13 Degrees
• Max. Rotational Speed
  37500 1/min
• Number of Inserts
  2
• Overall Height (Inch)
  5.197
• Overall Height (mm)
  132
• Sensor Embedded Property
  No
• Series
  CoroMill 200
• Shank Diameter (Inch)
  1
• Shank Diameter Tolerance
  H6
• Shank Type
  Whistle Notch/Weldon
• Torque (ft lbf)
  1.475 ft lbf
• Torque (NM)
  2 Nm
• Usable Length (Inch)
  3
• Usable Length (mm)
  76.2
• Item Weight
  1.21 lbs per PC