CoroMill 200 Series RA200-019MN32-13M Steel Face Mill

Item Specifications

• ANSI Code
  RA200-019MN32-13M
• Arbor Hole Diameter (Inch)
  1.25
• Arbor Hole Diameter (mm)
  31.75
• Body Diameter (Inch)
  1.25
• Body Diameter (mm)
  31.75
• Body Length (Inch)
  3.75
• Body Length (mm)
  95.25
• Clamping Type
  Screw/Clamp
• Coolant Entry Style Code
  Without Coolant
• Coolant Through
  No
• Cutting Diameter (Inch)
  0.75
• Cutting Diameter (mm)
  19.05
• Cutting Pitch Differential
  No
• Damping Property
  No
• Direction of Hand
  Right
• Material ID
  5737644
• Material
  Steel
• Max. Cutting Diameter (Inch)
  1.25
• Max. Cutting Diameter (mm)
  31.75
• Max. Depth of Cut (Inch)
  0.375
• Max. Depth of Cut (mm)
  9.525
• Max. Plunge Depth (Inch)
  0.138
• Max. Plunge Depth (mm)
  3.5
• Max. Ramping Angle
  13 Degrees
• Max. Rotational Speed
  31000 1/min
• Number of Inserts
  2
• Overall Height (Inch)
  6.024
• Overall Height (mm)
  153
• Sensor Embedded Property
  No
• Series
  CoroMill 200
• Shank Diameter (Inch)
  1 1/4
• Shank Diameter Tolerance
  H6
• Shank Type
  Whistle Notch/Weldon
• Torque (ft lbf)
  2.213 ft lbf
• Torque (NM)
  3 Nm
• Usable Length (Inch)
  3.75
• Usable Length (mm)
  95.25
• Item Weight
  1.90 lbs per PC