CoroMill 200 Series RA200-032MN32-19M Steel Face Mill

Item Specifications

• ANSI Code
  RA200-032MN32-19M
• Arbor Hole Diameter (Inch)
  1.25
• Arbor Hole Diameter (mm)
  31.75
• Body Diameter (Inch)
  2
• Body Diameter (mm)
  50.8
• Body Length (Inch)
  1.625
• Body Length (mm)
  41.275
• Clamping Type
  Screw/Clamp
• Coolant Entry Style Code
  Without Coolant
• Coolant Through
  No
• Cutting Diameter (Inch)
  1.25
• Cutting Diameter (mm)
  31.75
• Cutting Pitch Differential
  No
• Damping Property
  No
• Direction of Hand
  Right
• Material ID
  5739054
• Material
  Steel
• Max. Cutting Diameter (Inch)
  2
• Max. Cutting Diameter (mm)
  50.8
• Max. Depth of Cut (Inch)
  0.563
• Max. Depth of Cut (mm)
  14.288
• Max. Plunge Depth (Inch)
  0.228
• Max. Plunge Depth (mm)
  5.8
• Max. Ramping Angle
  13 Degrees
• Max. Rotational Speed
  20900 1/min
• Number of Inserts
  3
• Overall Height (Inch)
  4.016
• Overall Height (mm)
  102
• Sensor Embedded Property
  No
• Series
  CoroMill 200
• Shank Diameter (Inch)
  1 1/4
• Shank Diameter Tolerance
  H6
• Shank Type
  Whistle Notch/Weldon
• Torque (ft lbf)
  5.532 ft lbf
• Torque (NM)
  7.5 Nm
• Item Weight
  1.98 lbs per PC