T-Max P PDJNR 1616H 11HP 16 MM Shank 100 MM OAL Toolholder

Item Specifications

• ANSI Code
  PDJNR 1616H 11HP
• Body Material
  Steel
• Clamping Type Code
  Clamp
• Coolant Entry Style Code
  Axial Concentric Entry
• Coolant Entry Thread Size
  G1/8-28
• Coolant Exit Style Code
  Decentral Focused Exit With Nozzles
• Coolant Pressure (Inch)
  3988.54 lbf/in2
• Coolant Pressure (mm)
  275 Bar
• Coolant Through
  Yes
• Coolant
  Axial Concentric Entry
• Direction of Hand
  Right
• Inclination Angle
  -7 Degrees
• Insert Compatibility
  DNMG 110408
• Insert Style
  PDJNR/L..HP
• Machine Side Body Angle
  0 Degrees
• Material ID
  6188452
• Max. Overhang (Inch)
  1.453
• Max. Overhang (mm)
  36.9
• Max. Ramping Angle
  27 Degrees
• Orthogonal Rake Angle
  -6 Degrees
• Overall Height (Inch)
  0.63
• Overall Height (mm)
  16
• Overall Length (Inch)
  3.937
• Overall Length (mm)
  100
• Overall Width (Inch)
  0.787
• Overall Width (mm)
  20
• Series
  T-Max P
• Shank Height (Inch)
  0.63
• Shank Height (mm)
  16
• Shank Width (Inch)
  0.63
• Shank Width (mm)
  16
• Tool Cutting Edge Angle
  93 Degrees
• Tool Lead Angle
  -3 Degrees
• Torque (Inch)
  1.475 ft lbf
• Torque (mm)
  2 Nm
• Workpiece Side Body Angle
  0 Degrees
• Item Weight
  0.45 lbs per PC