CoroMill 331 N331.32C-125S40CM Milling Cutter

Item Specifications

• ANSI Code
  N331.32C-125S40CM
• Clamping Type Code
  Screw/Clamp
• Coolant Entry Style Code
  Axial Concentric Entry
• Coolant Pressure (Bar)
  80 Bar
• Coolant Pressure (lbf/in2)
  1160.3 lbf/in2
• Coolant Through
  Yes
• Cutting Diameter (Inch)
  4.921
• Cutting Diameter (mm)
  125
• Cutting Edge Count
  5
• Cutting Width (Inch)
  0.236
• Cutting Width (mm)
  6
• Direction of Hand
  Neutral
• Drive Count
  2
• Hole Diameter (Inch)
  1.575
• Hole Diameter (mm)
  40
• Hub Diameter (Inch)
  2.165
• Hub Diameter (mm)
  55
• Hub Thickness (Inch)
  0.551
• Hub Thickness (mm)
  14
• Material ID
  7295362
• Max. Cutting Depth (Inch)
  1.339
• Max. Cutting Depth (mm)
  34
• Max. Cutting Width (Inch)
  0.315
• Max. Cutting Width (mm)
  8
• Max. Rotational Speed
  15100 1/min
• Min. Cutting Width (Inch)
  0.236
• Min. Cutting Width (mm)
  6
• Min. Overall Length (Inch)
  0.394
• Min. Overall Length (mm)
  10
• Number of Inserts
  10
• Overall Length (Inch)
  0.394
• Overall Length (mm)
  10
• Sensor Embedded Property
  No
• Series
  CoroMill 331
• Torque (ft lbf)
  0.59 ft lbf
• Torque (NM)
  0.8 Nm
• Type
  Slot
• Item Weight
  0.84 lbs per PC