CoroMill MH20 Series MH20-R020A20-06L Steel Face Mill

Item Specifications

• ANSI Code
  MH20-R020A20-06L
• Arbor Hole Diameter (Inch)
  0.787
• Arbor Hole Diameter (mm)
  20
• Body Diameter (Inch)
  0.787
• Body Diameter (mm)
  20
• Clamping Type
  Screw/Clamp
• Coolant Entry Style Code
  Axial Concentric Entry
• Coolant Pressure (Bar)
  80 Bar
• Coolant Pressure (lbf-in2)
  1160.3 lbf/in2
• Coolant Through
  Yes
• Cutting Diameter (Inch)
  0.48
• Cutting Diameter (mm)
  12.2
• Cutting Pitch Differential
  No
• Damping Property
  No
• Direction of Hand
  Right
• Major Cutting Edge Angle
  15 Degrees
• Material ID
  8029422
• Material
  Steel
• Max. Cutting Diameter (Inch)
  0.787
• Max. Cutting Diameter (mm)
  20
• Max. Depth of Cut (Inch)
  0.165
• Max. Depth of Cut (mm)
  4.2
• Max. Plunge Depth (Inch)
  0.028
• Max. Plunge Depth (mm)
  0.7
• Max. Ramping Angle
  5.8 Degrees
• Max. Rotational Speed
  17200 1/min
• Number of Inserts
  2
• Overall Height (Inch)
  7.087
• Overall Height (mm)
  180
• Sensor Embedded Property
  No
• Series
  CoroMill MH20
• Shank Diameter (mm)
  20 MM
• Shank Type
  Cylindrical
• Torque (ft lbf)
  0.664 ft lbf
• Torque (NM)
  0.9 Nm
• Usable Length (Inch)
  3.15
• Usable Length (mm)
  80
• Item Weight
  0.83 lbs per PC