CoroMill MH20 Series MH20-R020A20-08L Steel Face Mill

Item Specifications

• ANSI Code
  MH20-R020A20-08L
• Arbor Hole Diameter (Inch)
  0.787
• Arbor Hole Diameter (mm)
  20
• Clamping Type
  Screw/Clamp
• Coolant Entry Style Code
  Axial Concentric Entry
• Coolant Through
  Yes
• Cutting Diameter (Inch)
  0.368
• Cutting Diameter (mm)
  9.35
• Cutting Pitch Differential
  No
• Damping Property
  No
• Direction of Hand
  Right
• Major Cutting Edge Angle
  15 Degrees
• Material ID
  8029431
• Material
  Steel
• Max. Cutting Diameter (Inch)
  0.787
• Max. Cutting Diameter (mm)
  20
• Max. Depth of Cut (Inch)
  0.209
• Max. Depth of Cut (mm)
  5.3
• Max. Plunge Depth (Inch)
  0.035
• Max. Plunge Depth (mm)
  0.9
• Max. Ramping Angle
  9.6 Degrees
• Max. Rotational Speed
  23400 1/min
• Number of Inserts
  2
• Overall Height (Inch)
  4.724
• Overall Height (mm)
  120
• Sensor Embedded Property
  No
• Series
  CoroMill MH20
• Shank Diameter (mm)
  20 MM
• Shank Type
  Cylindrical
• Torque (ft lbf)
  1.033 ft lbf
• Torque (NM)
  1.4 Nm
• Usable Length (Inch)
  1.575
• Usable Length (mm)
  40
• Item Weight
  0.55 lbs per PC