Minimaster MM10-10.50-HF-MD08 Head Mill Insert Carbide - Coated

Order in Multiples of 2

Item Specifications

• ANSI Code
  MM10-10.50-HF-MD08
• Application
  Wear Resistant-Steel
• Chip Breaker Type
  MD08
• Corner Radius (Inch)
  0.032
• Corner Radius (mm)
  0.8
• Curved Cutting Edge Radius (Inch)
  0.197
• Curved Cutting Edge Radius (mm)
  5
• Cutting Diameter (Inch)
  0.197
• Cutting Diameter (mm)
  5
• Finish
  Coated
• Functional Length (Inch)
  0.335
• Functional Length (mm)
  8.5
• Grade
  F30M
• Material
  Carbide
• Max. Cutting Diameter (Inch)
  0.394
• Max. Cutting Diameter (mm)
  10
• Max. Depth of Cut (Inch)
  0.017
• Max. Depth of Cut (mm)
  0.44
• Max. Depth Of Cut In Feed Direction End (Inch)
  0.158
• Max. Depth Of Cut In Feed Direction End (mm)
  4
• Max. Depth Of Cut In Feed Direction Side (Inch)
  0.017
• Max. Depth Of Cut In Feed Direction Side (mm)
  0.44
• Max. Helical Interpolation Hole Diameter (Inch)
  0.717
• Max. Helical Interpolation Hole Diameter (mm)
  18.2
• Max. Ramping Angle
  5 Degrees
• Min. Helical Interpolation Hole Diameter (Inch)
  0.48
• Min. Helical Interpolation Hole Diameter (mm)
  12.2
• Number of Cutting Edges (Peripheral Effective)
  2
• Number of Cutting Edges
  1
• Number of Peripheral Edges
  2
• Programming Radius (Inch)
  0.045
• Programming Radius (mm)
  1.13
• Series
  Minimaster
• Tool Cutting Edge Angle In Feed Direction Side
  90 Degrees
• Torque
  12 Nm
• Item Weight
  0.02 lbs per PC