Minimaster MM12-12.60-HF-MD10 Head Mill Insert Carbide - Coated

Order in Multiples of 2

Item Specifications

• ANSI Code
  MM12-12.60-HF-MD10
• Application
  Wear Resistant-Steel
• Chip Breaker Type
  MD10
• Corner Radius (Inch)
  0.032
• Corner Radius (mm)
  0.8
• Curved Cutting Edge Radius (Inch)
  0.256
• Curved Cutting Edge Radius (mm)
  6.5
• Cutting Diameter (Inch)
  0.236
• Cutting Diameter (mm)
  6
• Finish
  Coated
• Functional Length (Inch)
  0.404
• Functional Length (mm)
  10.25
• Grade
  F30M
• Material
  Carbide
• Max. Cutting Diameter (Inch)
  0.472
• Max. Cutting Diameter (mm)
  12
• Max. Depth of Cut (Inch)
  0.02
• Max. Depth of Cut (mm)
  0.51
• Max. Depth Of Cut In Feed Direction End (Inch)
  0.189
• Max. Depth Of Cut In Feed Direction End (mm)
  4.8
• Max. Depth Of Cut In Feed Direction Side (Inch)
  0.02
• Max. Depth Of Cut In Feed Direction Side (mm)
  0.51
• Max. Helical Interpolation Hole Diameter (Inch)
  0.874
• Max. Helical Interpolation Hole Diameter (mm)
  22.2
• Max. Ramping Angle
  5 Degrees
• Min. Helical Interpolation Hole Diameter (Inch)
  0.575
• Min. Helical Interpolation Hole Diameter (mm)
  14.6
• Number of Cutting Edges (Peripheral Effective)
  2
• Number of Cutting Edges
  1
• Number of Peripheral Edges
  2
• Programming Radius (Inch)
  0.048
• Programming Radius (mm)
  1.21
• Series
  Minimaster
• Tool Cutting Edge Angle In Feed Direction Side
  90 Degrees
• Torque
  12 Nm
• Item Weight
  0.04 lbs per PC