R220.21-02.00-R160-5A Arbor High Feed Face Mill - Nickel

Item Specifications

• ANSI Code
  R220.21-02.00-R160-5A
• Connection Bore Diameter (Inch)
  0.75
• Connection Bore Diameter (mm)
  19.05
• Contact Surface Diameter Machine Side (Inch)
  1.85
• Contact Surface Diameter Machine Side (mm)
  47
• Coolant Through
  Yes
• Cutting Diameter (Inch)
  1.327
• Cutting Diameter (mm)
  33.7
• Cutting Pitch Density
  Close
• Depth Of Key Way (Inch)
  0.191
• Depth Of Key Way (mm)
  4.85
• Finish
  Nickel
• Functional Length (Inch)
  1.6
• Functional Length (mm)
  40.64
• Keyway Width (Inch)
  0.322
• Keyway Width (mm)
  8.18
• Material
  819B (35NCD16) 44HRc
• Max. Cutting Diameter (Inch)
  2
• Max. Cutting Diameter (mm)
  50.8
• Max. Depth of Cut (Inch)
  0.079
• Max. Depth of Cut (mm)
  2
• Max. Depth Of Cut In Feed Direction End (Inch)
  0.433
• Max. Depth Of Cut In Feed Direction End (mm)
  11
• Max. Depth Of Cut In Feed Direction Side (Inch)
  0.079
• Max. Depth Of Cut In Feed Direction Side (mm)
  2
• Max. Helical Interpolation Hole Diameter (Inch)
  3.921
• Max. Helical Interpolation Hole Diameter (mm)
  99.6
• Max. Ramping Angle
  1.17 Degrees
• Max. Rotational Speed
  12900 rpm
• Min. Helical Interpolation Hole Diameter (Inch)
  3.327
• Min. Helical Interpolation Hole Diameter (mm)
  84.5
• Number of Cutting Edges (Peripheral Effective)
  5
• Programming Radius (Inch)
  0.119
• Rake Angle Axial
  6 Degrees
• Rake Angle Orthogonal
  -5 Degrees
• Rake Angle Radial
  -5 Degrees
• Shank Type
  Arbor
• Uncut Thickness (Inch)
  0.041
• Uncut Thickness (mm)
  1.04
• Item Weight
  1.01 lbs per PC