Amada Machinery America, Inc.
8-Mark-III Vertical Tilt-Frame Saw
Item #:
15951-VT4555M
Product Info
- Front Mounted Speed Control – Allows blade speed to be adjusted from the operator’s control station.
- T-Slotted Work Table – Work area 24.25” x 33” (616 mm x 838 mm); table height 34.5” (876 mm); four machined T-slots accept .625” (15.5 mm) T-Bolts on our VT4555. Work area 24.25” x 33” (616 mm x 838 mm); Table height 38” (965 mm); Two machined T-slots on our VT4555M.
- 0 – 3° Canted Column – Adjustable 0 or 3° forward approach angle, for notching, or increased efficiency in the cutting of structural materials.
- Miter Cutting – Column and blade tilt up to 60° right and left. Optional Powered Tilt is available.
- Quick Action Vice – Maximum opening 18” (457 mm). Jaws can be shifted to either right or left side of the blade. Jaws are 6” (152 mm) high, 12” (305 mm) wide.
- Automatic Stops – Adjustable stops can be pre-set to stop advance and return of blade, and also to stop the motor at any location within the 18” (457 mm) travel of the blade.
- Flushing Hose – Washes chips from hard to get at places reducing clean-up time.
- Power Chip Brush – Together with blade wipers and flood coolant deep blade teeth free of chips.
- Eagle Beak VTR Blade – Eagle Beak VTR blade with 3/6 tooth pitch. This is the standard blade that is included with machine purchase.
8-Mark-III Vertical Tilt-Frame Saw
Item Specifications
-
80 PSI
-
87-145 PSI
-
15'4"
-
50-450 ft/min
-
1-1/4
-
30 Hz
-
5
-
94.7 x 99.2 x 90.8
-
3
-
Electric
-
38
-
19.8 Gallon
-
Must be Specified when Ordering
-
2,867.00 lbs per PC